There are two parts to the configuration, the first being the server(s) under management, and the second being the supporting configuration on the web portal.

Both are covered in this chapter.

IP Office Configuration

SNMP Trap and Syslog Setup

Select the ‘System Events’ tab and then the ‘Configuration’ sub-tab, Check the ‘SNMP Enabled’ box and enter the community name ‘public’ and the ‘SNMP Port’ 161. Click OK.

SNMP Agent Field Descriptions

Select the ‘Alarms’ tab and click on the ‘Add’ button.

Click the radio button for ‘Trap’, Enter the IP address of the VSM Probe into the ‘Server Address’ field, 162 in the ‘Port’ field, public in the ‘Community’ field, select IP Office from the ‘Format’ drop down, and select warnings from the ‘Minimum Severity Level’ dropdown.

In the Events box, select all alarm types or only those you are interested in then click ‘OK’.

SNMP Trap Field descriptions

Click ‘Add’ again and this time click on the Radio button for ‘Syslog’. Enter the IP address of the VSM Probe into the ‘IP Address’ field, 514 in the ‘Port’ field, Select UDP from the ‘Protocol’ dropdown and Enterprise from the ‘Format’ dropdown. In the Events box, select all alarm types then click ‘OK’.

Click ‘OK’ to the ‘System Events’ tab.

Syslog Field Descriptions

Configure CDR

Select the ‘SMDR’ Tab, Set the ‘Output’ dropdown to SMDR Only. Enter the IP address of the VSM Probe into the ‘IP Address’ field, entry 9000 in the ‘TCP Port’ field, set ‘Records to Buffer’ field to 500, check the ‘Call Splitting for Diverts’ box. Then click ‘OK’.

CDR Field Descriptions

Configure RTCP for VQM

The following changes are required to define the VSM Probe as the destination for RTCP traffic from the UC environment.

Select the ‘LAN1’ tab, then the ‘VoIP’ sub tab. Uncheck the 'Enable RTCP Monitoring on port 5005' box and then enter the IP address of the VSM Probe into the ‘RTCP Collector IP Address for Phones’ field. 

Lan1: Voip - RTCP Field descriptions

Select the 'Telephony' tab, at the bottom left of this tab complete the 'RTCP Collector Configuration' details.

Telephony - RTCP Collector Configuration

Configure Service User account for Web Services API

VSM utilises the Web Services API on the IP Office to gather information for reporting and Dashboards. The following user needs to be created so that VSM can access the Web Services API on the IP Office. Follow the steps below to administer this user account:

Login to your IP Office as an administrator

From the Top menu in the IP Office manager select – File> Advanced> Security Settings

Service Security Settings

In Security Settings expand ‘Services’ and select ‘Web Services’.

Set the Service Security Level to ‘Secure, Medium’ if it is not already.

Web Service Security Field Descriptions

Rights Group Settings

In Security Settings expand the ‘Rights Groups’ branch and check to see if there is already a Rights Group called ‘Web Services’ if there is not you will need to create this using the steps below:

In the Security Settings Menu right-click on ‘Rights Groups’ and select ‘New’

Set the Group Name to ‘Web Services’ and click OK.

Select the new Web Services Rights Group from the list, then in the right hand pane select the ‘Web Services’ tab.

In this Tab in the IP Office Service Rights pane check the boxes for Config Read All and Service Monitor Read. In the Web Manager Rights pane check all boxes.

Then click OK at the bottom right-hand corner.

Rights Group Field Descriptions

Create Service User

From the Security Settings Tree select ‘Service Users’ then right-click in the ‘Service Users’ pane and select ‘New’

Enter a new username and password. Click OK.

In the ‘Service Users’ pane select the user account you just created.

From the Rights Group Membership section check the ‘WebServices’ group and then click the OK button at the bottom right-hand corner.

Service User Rights Group Field Descriptions

This user account is now administered in the IP Office.

Web Portal Configuration

Add IP Office

Login to the VSM web portal using your credentials and password. For the particular customer, select Service Desk > Equipment Locations.

Right-click on the Equipment Location (Appliance) that will serve this particular IP Office and select ‘Manage Equipment’:

At the bottom of the ‘Manage Equipment’ page click on the ‘Add Equipment’ Button

A form will open which you can populate with the equipment details as per table 9. 

Select the Vendor ‘Avaya’ and Product ‘IP Office’.

If you are adding more than one piece of the same equipment type check the ‘Add another’ box at the bottom of the form and the bulk of the configuration will be carried over for the next item.

Web Portal – Add IP Office Field Description

SNMP

Complete the Equipment tab and then click on the ‘SNMP Query’ tab.

Click on the down arrow, and select the SNMP version you wish VSM to use for querying IP Office:

SNMP V1 or V2

IP Office SNMP Field Description

SNMP V3

IP Office SNMP V3 Field Description

Test Access

Once all fields are populated Click on the Test Access button. This will test that VSM can connect to IP Office using the settings you have entered:

Both SSH and SNMP should return success. If not, troubleshoot the configuration.

Once testing is successful, click Save.