...
| Code Block |
|---|
|
Router# show running-config
Router# show startup-config
Router# show platform software mount
Router# show version
Router# show dial-peer voice summary |
CUBE SNMP Configuration
There are two options for SNMP monitoring of the CUBE, SNMP Version 2c and SNMP version 3. SNMP Version 3 is more secure and is the preferred method.
SNMP Version 2 option
Configure the SNMP Community using To configure SNMP V2c monitoring of the CUBE you will need the following commands:
...
| Parameter | Description |
|---|
| VSM Collector IP Address | IP address of the VSM Collector at the customers site |
Configure the SNMP Community using the following commands:
| Code Block |
|---|
|
|
Router # Conf t
Router(config)# snmp-server community {Enter SNMP Value here} virsae RO
Router(Config)# snmp-server locationhost <location>{VSM #ThisCollector commandIP isAddress} optionalversion and may needed only if you want to specify the location.
Router2c virsae
Router(Config)# snmp-server contact <contact info> #This command is optionalenable traps
Router(Config)#exit
|
Use the following commands to verify SNMP V2 Configuration
| Code Block |
|---|
|
Router # snmp-server host {Enter VSM Probe IP Address here} [traps | informs] version 2c community-string [udp-port port-number] [notification-type]
Router(Config)#exit
Show snmp community << This will display configured community string
Router # show snmp host << This should display the configured SNMP host which should match the configured one |
The following example demonstrates a sample configuration of SNMP Version 2 with option to enable all trapsUse the following commands to verify SNMP V2 Configuration
| Code Block |
|---|
|
Router # Show snmp community << This will display configured# Conf t
Router(Config)# snmp-server community stringvirsae RO
Router (Config)# show snmp-server host 10.10.10.20 version 2c virsae
Router(Config)# snmp-server enable << This should display the configured SNMP host which should match the configured onetraps
Router (Config) # Exit |
Verification output :The following example demonstrates a sample configuration of SNMP Version 2 with option to enable all traps
| Code Block |
|---|
|
Router # Show snmp Community
Community # Conf t
Router(Config)# snmp-server community VirsaeVSM RO
Router(Config)# snmp-server location BHIVE Auckland
Router(Config)# snmp-server contact Virsae Support Team
Router(Config)# snmp-server hostname: virsae
Community Index: virsae
Community SecurityName: virsae
storage-type: nonvolatile active
Router # Show snmp host
Notification host: 10.10.10.20 version 2c VirsaeVSM
Router(Config)# snmp-server enable traps
Router (Config) # Exit |
Verification output :
| Code Block |
|---|
|
Router # Show snmp Community
Community name: VirsaeVSM
Community Index: VirsaeVSM
Community SecurityName: VirsaeVSM
storage-type: nonvolatile active
Router # Show snmp host
Notification host: 10.10.10.20 udp-port: 162 type: trap user: VirsaeVSM security model: v2c |
The following example demonstrates a sample configuration of SNMP Version 2 with option to enable some traps
| Code Block |
|---|
|
Router # Conf t
Router(Config)# snmp-server community VirsaeVSM RO
Router(Config)# snmp-server location BHIVE Auckland
Router(Config)# snmp-server contact Virsae Support Team
Router(Config)# snmp-server host 10.10.10.20 version 2c VirsaeVSM
Router(Config)# snmp-server enable traps snmp authentication linkdown linkup coldstart
Router(Config)# snmp-server enable traps cpu threshold
Router(Config)# snmp-server enable traps ipsla
Router(Config)# snmp-server enable traps config-copy
Router(Config)# snmp-server enable traps license
Router(Config)# snmp-server enable traps envmon
Router(Config)# snmp-server enable traps bgp |
SNMP Version 3 option
Configure the SNMP V3 using the following commands:
| Code Block |
|---|
|
Router # Conf t
Router(config)# snmp-server view {Enter View Name Here}
Router(Config)# snmp-server group <Group Name> v3 [priv|auth|noauth] read <View Name >
Router(Config)# snmp-server user <username> <Group Name> v3 [encrypted] [auth {md5 | sha} auth-password]}
Router(Config)# snmp-server host <Enter VSM Probe IP Address here> version 3 [auth|no auth|priv] <Enter user name here>
Router(Config)# exit |
Use the following commands to verify SNMP V3 Configuration
| Code Block |
|---|
|
Router # Show snmp user << This will display configured snmp V3 user
Router # show snmp host << This should display the configured SNMP host which should match the configured one |
The following demonstrates a sample configuration of SNMP Version 3 with Parameters shown in the following table with option to enable all traps with Authentication and Privacy
...
udp-port: 162 type: trap user: virsae security model: v2c |
SNMP Version 3 option
To configure SNMP v3 monitoring of the CUBE you will need the following:
| Parameter | Value | Description |
|---|
| View Name | Virsaeview | Use Virsaeview by default |
| Group Name | Virsaegroup | Use Virsagroup by default |
| User Name |
| The SNMP Trap username administered in your VSM equipment location |
| Authentication Protocol | SHA or MD5 | The SNMP Trap Authentication protocol administered in your VSM equipment location |
| Authentication Password |
| The SNMP Trap Authentication password administered in your VSM equipment location |
| Privacy Protocol | AES 128, AES 196, AES 256, DES | The SNMP Trap privacy protocol administered in your VSM equipment location |
Privacy Password |
| The SNMP Trap privacy password administered in your VSM equipment location |
| VSM Collector IP Address |
| The IP address of the VSM Collector |
The SNMP Trap configuration in VSM is documented here SNMP Configuration
Configure the SNMP V3 using the following commands:
| Code Block |
|---|
|
Router # Conf t
Router(config)# snmp-server view <View Name> iso included |
| Code Block |
|---|
|
Router(Config)# snmp-server view virsaelab iso included
Router(Config)# snmp-server group VSMMonitor v3 priv read virsaelab
Router(Config)# snmp-server user VSMUser VSMMonitor v3 auth sha P@ssword123 priv aes 256 P@ssword123
Router(Config)# snmp-server host 192.168.5.180 version 3 priv VSMUser
Router(Config)# snmp-server enable traps group <Group Name> v3 priv read <View Name>
Router(Config)# Exit
|
Verification output :
| Code Block |
|---|
|
Router # Show snmp user
User name: VSMUser
Engine ID: 800000090300005056BA6363
storage-type: nonvolatile active
Authentication Protocol: SHA
Privacy Protocol: AES256
Group-name: VSMMonitor
Router # Show snmp host
Notification host: 192.168.5.180 udp-port: 162 type: trap user: VSMUser security model: v3 priv
|
The following demonstrates a sample configuration of SNMP Version 3 with Parameters shown in the following table with option to enable traps with Authentication Only
...
snmp-server user <User Name> <Group Name> v3 auth <Authentication Protocol> <Authentication Password> priv <Privacy Protocol> <Privacy Password>
Router(Config)# snmp-server host <VSM Collector IP Address> version 3 priv <User Name>
Router(Config)# exit |
Example (View name=Virsaeview, Groupname = Virsaegroup, Username = Virsaesnmp):
| Code Block |
|---|
|
Router(Config)# snmp-server view Virsaeview iso included
Router(Config)# snmp-server group Virsaegroup v3 priv read Virsaeview
Router(Config)# snmp-server user Virsaesnmp Virsaegroup v3 auth sha P@ssword123 priv aes 256 P@ssword123
Router(Config)# snmp-server host 192.168.5.180 version 3 priv Virsaesnmp |
| Code Block |
|---|
|
Router(Config)# snmp-server view virsaelab iso included
Router(Config)# snmp-server group VSMMonitor v3 auth read virsaelabenable traps
Router(Config)# Exit
|
Use the following commands to verify the SNMP V3 Configuration is correct administered:
| Code Block |
|---|
|
Router # Show snmp-server user << VSMUserThis VSMMonitorwill v3display authconfigured shasnmp P@ssword123V3 user
Router(Config) # show snmp-server host 192.168.5.180 version 3 auth VSMUser
Router(Config)# snmp-server enable traps
Router(Config)# Exit << This should display the configured SNMP host which should match the configured one |
Example Verification output :
| Code Block |
|---|
|
Router # Show snmp user
User name: VSMUserVirsaesnmp
Engine ID: 800000090300005056BA6363
storage-type: nonvolatile active
Authentication Protocol: SHA
Privacy Protocol: None
Group-name: VSMMonitorVirsaegroup
Router # Show snmp host
Notification host: 192.168.5.180 udp-port: 162 type: trap user: VSMUserVirsaesnmp security model: v3 auth |
CDR Configuration
...
| Code Block |
|---|
|
Router(Config)# logging host (Enter VSM ProbCollector IP Address)
Router(Config)# logging traps (i.e 0 1 2 3 4 5 .. according to your requirement)
|
Once complete you can move onto the VSM Web Portal Configuration
...