...
| Code Block | ||
|---|---|---|
| ||
Router# show running-config Router# show startup-config Router# show platform software mount Router# show platform softwareversion Router# show platform Router# show dial-peer voice summary Router# show dial-peer voice Router# show dial-peer Router# show call active voice compact Router# show users Router# show Router# show environment |
Local User Option
Login to IOS and enter the following commands:
| Code Block | ||
|---|---|---|
| ||
Router # Conf t Router(config)# username {Enter User Here} privilege 5 Password {Type Password} Router(config)# privilege exec level 5 show platform software mount Router(config)# privilege exec level 5 show platform software Router(config)# privilege exec level 5 show platform Router(config)# privilege exec level 5 show dial-peer voice summary Router(config)# privilege exec level 5 show dial-peer voice Router(config)# privilege exec level 5 show dial-peer Router(config)# privilege exec level 5 show version |
Test the account by logging to the CUBE (SSH to CUBE with the account created) and run ALL the commands shown below.
...
| Code Block | ||
|---|---|---|
| ||
Router# show running-config Router# show startup-config Router# show platform software mount Router# show platform softwareversion Router# show platform Router# show dial-peer voice summary Router# show dial-peer voice Router# show dial-peer Router# show call active voice compact Router# show users Router# show Router# show environment |
CUBE SNMP Configuration
...
CUBE SNMP Configuration
There are two options for SNMP monitoring of the CUBE, SNMP Version 2c and SNMP version 3. SNMP Version 3 is more secure and is the preferred method.
SNMP Version 2 option
To configure SNMP V2c monitoring of the CUBE you will need the following:
| Parameter | Description |
|---|---|
| VSM Collector IP Address | IP address of the VSM Collector at the customers site |
Configure the SNMP Community using the following commands:
| Code Block | ||
|---|---|---|
| ||
Router # Conf t
Router(config)# snmp-server community virsae RO
Router(Config)# snmp-server host {VSM Collector IP Address} version 2c virsae
Router(Config)# snmp-server enable traps
Router(Config)#exit
|
Use the following commands to verify SNMP V2 Configuration
| Code Block | ||
|---|---|---|
| ||
Router # Show snmp community << This will display configured community string
Router # show snmp host << This should display the configured SNMP host which should match the configured one |
The following example demonstrates a sample configuration of SNMP Version 2 with option to enable all traps
| Code Block | ||
|---|---|---|
| ||
Router(config # Conf t Router(Config)# snmp-server community {Enter SNMP Value here} ROvirsae RO Router(Config)# snmp-server host 10.10.10.20 version 2c virsae Router(Config)# snmp-server location <location> #This command is optional and may needed only if you want to specify the location. Router(Config)# snmp-server contact <contact info> #This command is optional enable traps Router (Config) # Exit |
Verification output :
| Code Block | ||
|---|---|---|
| ||
Router # Show snmp Community
Community name: virsae
Community Index: virsae
Community SecurityName: virsae
storage-type: nonvolatile active
Router # Show snmp host
Notification host: 10.10.10.20 udp-port: 162 type: trap user: virsae security model: v2c |
SNMP Version 3 option
To configure SNMP v3 monitoring of the CUBE you will need the following:
| Parameter | Value | Description |
|---|---|---|
| View Name | Virsaeview | Use Virsaeview by default |
| Group Name | Virsaegroup | Use Virsagroup by default |
| User Name | The SNMP Trap username administered in your VSM equipment location | |
| Authentication Protocol | SHA or MD5 | The SNMP Trap Authentication protocol administered in your VSM equipment location |
| Authentication Password | The SNMP Trap Authentication password administered in your VSM equipment location | |
| Privacy Protocol | AES 128, AES 196, AES 256, DES | The SNMP Trap privacy protocol administered in your VSM equipment location |
Privacy Password | The SNMP Trap privacy password administered in your VSM equipment location | |
| VSM Collector IP Address | The IP address of the VSM Collector |
The SNMP Trap configuration in VSM is documented here SNMP Configuration
Configure the SNMP V3 using the following commands:Configure the VSM probe as the SNMP Host.
| Code Block | ||
|---|---|---|
| ||
Router # Conf t Router(config)# snmp-server view <View Name> iso included Router(Config)# snmp-server hostgroup {Enter<Group VSMName> Probev3 IPpriv Addressread here}<View [traps | informs] [version {1| 2c | 3 [auth | noauth | priv]}] community-string [udp-port port-number] [notification-type]Name> Router(Config)# snmp-server user <User Name> <Group Name> v3 auth <Authentication Protocol> <Authentication Password> priv <Privacy Protocol> <Privacy Password> Router(Config)# snmp-server host <VSM Collector IP Address> version 3 priv <User Name> Router(Config)# exit |
Example (View name=Virsaeview, Groupname = Virsaegroup, Username = Virsaesnmp):The following example demonstrates a sample configuration of SNMP.
| Code Block | ||
|---|---|---|
| ||
Router(Config)# snmp-server view communityVirsaeview VirsaeVSMiso ROincluded Router(Config)# snmp-server location BHIVE Auckland group Virsaegroup v3 priv read Virsaeview Router(Config)# snmp-server contact Virsae Support Teamuser Virsaesnmp Virsaegroup v3 auth sha P@ssword123 priv aes 256 P@ssword123 Router(Config)# snmp-server host 10192.10168.105.20180 version 3 2cpriv VirsaeVSMVirsaesnmp Router(Config)# snmp-server enable traps Router(Config)# snmp authentication linkdown linkup coldstart Router(Config)# snmp-server enable traps cpu threshold Router(Config)# snmp-server enable traps ipsla Router(Config)# snmp-server enable traps config-copy Router(Config)# snmp-server enable traps license Router(Config)# snmp-server enable traps envmon Router(Config)# snmp-server enable traps bgpExit |
Use the following commands to verify the SNMP V3 Configuration is correct administered:
| Code Block | ||
|---|---|---|
| ||
Router # Show snmp user << This will display configured snmp V3 user
Router # show snmp host << This should display the configured SNMP host which should match the configured one |
Example Verification output :
| Code Block | ||
|---|---|---|
| ||
Router # Show snmp user
User name: Virsaesnmp
Engine ID: 800000090300005056BA6363
storage-type: nonvolatile active
Authentication Protocol: SHA
Privacy Protocol: None
Group-name: Virsaegroup
Router # Show snmp host
Notification host: 192.168.5.180 udp-port: 162 type: trap user: Virsaesnmp security model: v3 auth |
CDR Configuration
Voice Quality Metrics (VQM) Configuration
| Code Block | ||
|---|---|---|
| ||
Router #Conf t
Router (config)# voice service voip
Router (conf-voi-serv)# callmonitor
Router (conf-voi-serv)# media statistics
Router (conf-voi-serv)# exit
|
Enter media monitoring command for each required dial-peer in order to enable monitoring of the calls on each dial peer
| Code Block | ||
|---|---|---|
| ||
Router #Conf t
Router (config)# dial-peer voice <tag> voip
Router (config-dialpeer)# media monitoring
Router (config-dialpeer)# end
|
RADIUS Accounting Configuration
There are two possible options for configuring RADIUS accounting
1- VSM is the only RADIUS Server to be configured on Cisco CUBE
2- VSM is not the only RADIUS Server , There is an existing RADIUS Server Set up on Cisco CUBE for AAA Operation
Single RADIUS Server Option (VSM Only)
Perform the following steps to configure CUBE as Radius client to send accounting information to VSM
| Code Block | ||
|---|---|---|
| ||
Router #Conf t
Router (config)# aaa new-model
Router (config)# radius server VSM
Router (config-radius-server)# address ipv4 <VSM Probe IP Address> auth-port 1812 acct-port 1813
Router (config-radius-server)# key <shared secret - this key to be used in VSM Web Portal>
Router (config-radius-server)# exit
Router (config)# aaa group server radius VSMradiusgroup
Router (config-sg-radius)#server name VSM
Router (config-sg-radius)#ip radius source-interface <Enter Interface Name that will be used to send CDR information to VSM>
Router (config-sg-radius)#exit
Router (config)#aaa accounting connection h323 start-stop group VSMradiusgroup
Router (config)#gw-accounting aaa
Router (config-gw-accounting-aaa)# acct-template callhistory-detail
Router (config-gw-accounting-aaa)# exit
Router (config)# radius-server vsa send accounting
Router (config)# exit
|
Multiple RADIUS Servers option
If Cisco CUBE has already been configured to use other Radius server for AAA operations make sure that this server is placed in another server group by using the following commands .
| Code Block | ||
|---|---|---|
| ||
Router #Conf t
Router (config)# aaa group server radius <groupname>
Router (config-sg-radius)# server <ip-address > auth-port 1812 acct-port 1813
Router (config-sg-radius)# exit
Router (config)# aaa authentication login default group <groupname> local
Router (config)# aaa authorization exec default group <groupname> none
Router (config)# aaa accounting exec default start-stop group <groupname>
Router (config)# radius-server host <ip-address> auth-port 1812 acct-port 1813 key <shared-secret>
Router (config)# exit
|
| Parameter | Value |
|---|---|
| groupname | Name of the server group which contains all the RADIUS Servers being used for AAA operations. |
| ip-address | The IP address of the RADIUS Server group being used for AAA operations |
| <shared-secret> | Secret Key used to authenticate with the RADIUS Server |
Follow the steps mentioned in Single RADIUS Server option to send call accounting details to VSM.
CUBE Syslog Configuration
...
| Code Block | ||
|---|---|---|
| ||
Router(Config)# logging host (Enter VSM ProbCollector IP Address) Router(Config)# logging traps (i.e 0 1 2 3 4 5 .. according to your requirement) |
Once complete you can move onto the VSM Web Portal Configuration
Web Portal Configuration
Add CUBE
...
| Field | Setting |
|---|---|
Vendor | Cisco Systems |
Product | Unified Border Element |
Equipment Name | Friendly name for this CUBE |
Username | Administrative Username |
Password | Administrative Password |
IP Address / Host Name | IP Address of server (Virtual in duplicated servers) |
Site | Free text field, this information will be included in alarm notifications from the VSM Workflow. |
| Info |
|---|
Site ID information in the ‘Site’ field will advise your NOC staff of the site where the Microsoft Server (i.e. the VSM Collector) is physically located. This is particularly helpful when the customer has multiple sites. |
...
Click on the down arrow, and select the SNMP version you wish VSM to use for querying the CUBE:
SNMP V1 or V2
| Field | Setting |
|---|---|
Version | V1, V2 |
SNMP Community String | Community String as administered on the CUBE |
SNMP V3
| Fields | Setting |
|---|---|
Version | V3 |
Username | SNMP V3 Username (refer to technical requirements forms) |
Authentication Protocol | SHA (Recommended) |
Authentication Password | Password (refer to technical requirements) |
Privacy Protocol | DES (Recommended) |
Privacy Password | Password (refer to technical requirements forms) |
...