Create CUBE User

...

If the client is using TACACS or Radius to control IOS users, ask the client to create an account to that can access the CUBE with level 5 privileges.

...

Test the account by logging to into the CUBE (SSH to CUBE with the created account) and run those ALL the commands shown below.

...

Router# show running-config
Router# show startup-config
Router# show dial-peerplatform voicesoftware summarymount
Router# show dial-peer voiceversion
Router# show dial-peer
Router# show call active voice compact
Router# show platform software mount
Router# show platform software
Router# show platform
Router# showsummary

Local User Option

Login to IOS and enter the following commands:

Router        # Conf t
Router(config)# username {Enter User Here} privilege 5 Password  {Type Password}
Router(config)# privilege exec level 5 show dial-peerplatform voicesoftware summarymount
Router(config)# privilege exec level 5 show dial-peer voice
Router(config)# privilege exec level 5 show dial-peer  summary
Router(config)# privilege exec level 5 show platform software mount
Router(config)# privilege exec level 5 show platform software
Router(config)# privilege exec level 5 show platform
Router(config)# privilege exec level 5 show
version

Test the account by logging to the CUBE (SSH to CUBE with the account created) and run those ALL the commands shown below.

...

Router# show running-config
Router# show startup-config
Router# show dial-peerplatform voicesoftware summarymount
Router# show call activeversion
Router# show dial-peer voice compactsummary

CUBE SNMP Configuration

There are two options for SNMP monitoring of the CUBE, SNMP Version 2c and SNMP version 3. SNMP Version 3 is more secure and is the preferred method.

SNMP Version 2 option

To configure SNMP V2c monitoring of the CUBE you will need the following:

Configure the SNMP Community using the following commands:

Router        # Conf t
Router(config)# snmp-server community virsae RO
Router(Config)# snmp-server host {EnterVSM SNMPCollector ValueIP hereAddress} ROversion 2c virsae
Router(Config)# snmp-server location <location> #This command is optional and may needed only if you want to specify the location. enable traps
Router(Config)#exit

Use the following commands to verify SNMP V2 Configuration 

Router # Show snmp community  << This will display configured community string
Router # show snmp host       << This should display the configured SNMP host which should match the configured one

The following example demonstrates a sample configuration of SNMP Version 2 with option to enable all traps

Router        # Conf t
Router(Config)# snmp-server community virsae RO
Router(Config)# snmp-server host 10.10.10.20 version 2c virsae
Router(Config)# snmp-server contact <contact info> #This command is optional
 enable traps
Router (Config) # Exit

Verification output :

Router    # Show snmp Community
Community name: virsae
Community Index: virsae
Community SecurityName: virsae
storage-type: nonvolatile        active

Router # Show snmp host
Notification host: 10.10.10.20        udp-port: 162   type: trap  user: virsae       security model: v2c

SNMP Version 3 option

To configure SNMP v3 monitoring of the CUBE you will need the following:

The SNMP Trap configuration in VSM is documented here SNMP Configuration

Configure the SNMP V3 using the following commands:Configure VSM probe as SNMP Host.

Router        #  Conf t
Router(config)# snmp-server view <View Name> iso included
Router(Config)# snmp-server hostgroup {Enter<Group VSMName> Probev3 IPpriv Addressread here}<View 
[traps | informs] [version {1| 2c | 3 [auth | noauth | priv]}] community-string [udp-port port-number] [notification-type]Name>
Router(Config)# snmp-server user <User Name> <Group Name> v3 auth <Authentication Protocol> <Authentication Password> priv <Privacy Protocol> <Privacy Password>
Router(Config)# snmp-server host <VSM Collector IP Address> version 3 priv <User Name>
Router(Config)# exit

Example (View name=Virsaeview, Groupname = Virsaegroup, Username = Virsaesnmp):The following example shows a sample configuration of SNMP.

Router(Config)# snmp-server communityview Virsaeview VirsaeVSMiso ROincluded
Router(Config)# snmp-server location BHIVE Auckland group Virsaegroup v3 priv read Virsaeview
Router(Config)# snmp-server contact Virsae Support Team user Virsaesnmp Virsaegroup v3 auth sha P@ssword123 priv aes 256 P@ssword123
Router(Config)# snmp-server host 10192.10168.105.20180 version 2c3 priv VirsaeVSMVirsaesnmp
Router(Config)# snmp-server enable traps
Router(Config)# Exit

Use the following commands to verify the SNMP V3 Configuration is correct administered:

Router # Show snmp user  << This will display configured snmp V3 user
Router # show snmp host  << This should display the configured SNMP host which should match the configured one

Example Verification output :

Router    # Show snmp user
User name: Virsaesnmp
Engine ID: 800000090300005056BA6363
storage-type: nonvolatile        active
Authentication Protocol: SHA
Privacy Protocol: None
Group-name: Virsaegroup


Router snmp authentication linkdown linkup coldstart
Router(Config)# snmp-server enable traps cpu threshold
Router(Config)# snmp-server enable traps ipsla
Router(Config)# snmp-server enable traps config-copy
Router(Config)# snmp-server enable traps license
Router(Config)# snmp-server enable traps envmon
Router(Config)# snmp-server enable traps bgp# Show snmp host
Notification host: 192.168.5.180  udp-port: 162   type: trap user: Virsaesnmp     security model: v3 auth

CDR Configuration

Voice Quality Metrics (VQM) Configuration

Router    #Conf t
Router (config)# voice service voip
Router (conf-voi-serv)# callmonitor
Router (conf-voi-serv)# media statistics
Router (conf-voi-serv)# exit

Enter media monitoring command for each required dial-peer in order to enable monitoring of the calls on each dial peer

Router    #Conf t
Router (config)# dial-peer voice <tag> voip
Router (config-dialpeer)# media monitoring
Router (config-dialpeer)# end

RADIUS Accounting Configuration

There are two possible options for configuring RADIUS accounting 

1- VSM is the only RADIUS Server to be configured on Cisco CUBE

2- VSM is not the only RADIUS Server , There is an existing  RADIUS Server Set up on Cisco CUBE for AAA Operation 

Single RADIUS Server Option (VSM Only)

Perform the following steps to configure  CUBE as Radius client to send accounting information to VSM

Router    #Conf t
Router (config)# aaa new-model
Router (config)# radius server VSM
Router (config-radius-server)# address ipv4 <VSM Probe IP Address> auth-port  1812 acct-port 1813
Router (config-radius-server)# key <shared secret - this key to be used in VSM Web Portal>
Router (config-radius-server)# exit
Router (config)# aaa group server radius VSMradiusgroup
Router (config-sg-radius)#server name VSM
Router (config-sg-radius)#ip radius source-interface <Enter Interface Name that will be used to send CDR information to VSM>
Router (config-sg-radius)#exit
Router (config)#aaa accounting connection h323 start-stop group VSMradiusgroup
Router (config)#gw-accounting aaa
Router (config-gw-accounting-aaa)# acct-template callhistory-detail
Router (config-gw-accounting-aaa)# exit
Router (config)# radius-server vsa send accounting
Router (config)# exit

Multiple RADIUS Servers option

If Cisco CUBE has already been configured to use other Radius server for AAA operations make sure that this server is placed in another server group by using the following commands .

Router    #Conf t
Router (config)# aaa group server radius <groupname>  
Router (config-sg-radius)# server <ip-address > auth-port 1812 acct-port 1813
Router (config-sg-radius)# exit
Router (config)# aaa authentication login default group <groupname> local
Router (config)# aaa authorization exec default group <groupname> none
Router (config)# aaa accounting exec default start-stop group <groupname>
Router (config)# radius-server host <ip-address> auth-port 1812 acct-port 1813 key <shared-secret>
Router (config)# exit

Follow the steps mentioned in  Single RADIUS Server option to send call accounting details to VSM.

CUBE Syslog Configuration

Enter the IP Address of the VSM Probe as the destination for the log files.

Router(Config)# logging host (Enter VSM ProbCollector IP Address) 
Router(Config)# logging traps (i.e 0 1 2 3 4 5 .. according to your requirement)

Once complete you can move onto the VSM Web Portal Configuration

Web Portal Configuration

Add

...

CUBE

Log in to the VSM web portal using your VSM credentials and password.

...

A form will open which you can populate with the equipment details as per this the table below. 

Select the Vendor ‘Cisco Systems’ and Product ‘Unified Border Element’.

...

Image Modified

If you are adding more than one piece of the same equipment type, check the ‘Add another’ box at the bottom of the form and the bulk of the configuration will be carried over for the next item.Web Portal – Add CUBE

...

Image Added

SNMP

Complete the Equipment tab and then click on the ‘SNMP Query’ tab.

Click on the down arrow, and select the SNMP version you wish VSM to use for querying the CUBE:

SNMP V1 or V2

CUBE SNMP V1/V2 Field DescriptionsImage Added

SNMP V3

CUBE SNMP V3 Field DescriptionImage Added

Test Access

Once all fields are populated Click on the Test Access button. This will test that VSM can connect to the CUBE using the settings you have entered:

Image Modified

Both SSH and SNMP should return success. If not, troubleshoot the configuration.

...