Create CUBE User
VSM requires the user to be created on any Cisco IOS device. The user is required to run show commands.
User can be created using one of two options.
TACACS Option
If the client is using TACACS or Radius to control IOS users, ask the client to create an account to VSM User.
QUERY: Ask Eyad tomorrow what he meant by this?
Confirm with the TACACS team that you can run 'show' commands with the created account.
Test the account by logging to the CUBE (SSH to CUBE with the created account) and run those commands. Make sure there is output when you run these commands.
Router$ show running-config Router$ show startup-config Router$ show dial-peer voice summary Router$ show call active voice compact
Local User Option
Login to IOS and enter the following commands:
Router(config)$ username {Enter User Here} privilege 1 Password {Type Password}
Router(config)$ privilege exec level 1 show dial-peer voice summary
Router(config)$ privilege exec level 1 show dial-peer voice
Router(config)$ privilege exec level 1 show dial-peer voice
Router(config)$ privilege exec level 1 show
Test the account by logging to the CUBE (SSH to CUBE with the account created) and run those commands. Make sure there is output when you run these commands.
Router$ show running-config Router$ show startup-config Router$ show dial-peer voice summary Router$ show call active voice compact
CUBE CNMP Configuration
Configure the SNMP Community using the following commands:
Router(config)$ snmp-server community {Enter SNMP Value here} RO
Router(Config)$ snmp-server location <location> #This command is optional and may needed only if you want to specify the location.
Router(Config)$ snmp-server contact <contact info> #This command is optional
Configure VSM probe as SNMP Host.
Router (Config)$ snmp-server host {Enter VSM Probe IP Address here}
[traps | informs] [version {1| 2c | 3 [auth | noauth | priv]}] community-string [udp-port port-number] [notification-type]