...
Select the Vendor ‘Avaya’ and Product ‘System Manager’.
If you are adding more than one piece of the same equipment type, check the 'Add another' box at the bottom of the form and the bulk of the configuration will be carried over for the next item
Field | Setting |
|---|---|
Vendor | Avaya |
Product | System Manager |
Equipment Name | Friendly name |
Username | Username |
Password | Password |
IP Address/Host Name | IP Address or Hostname of the server |
Site | Friendly name for the site (where this server is located) |
Complete the Equipment tab fields, and then click on the SNMP Query tab.
Click on the down arrow, and select the SNMP version you wish VSM to use for querying the server:
SNMP V1 or V2
...
Fields
...
Setting
...
Version
...
V1, V2
...
SNMP Community String
...
Community String as administered on the server
SNMP V3
...
Fields
...
Setting
...
Version
...
V3
...
Username
...
SNMP V3 Username (refer to technical requirements forms)
...
Authentication Protocol
...
SHA
...
Authentication Password
...
Password (refer to technical requirements)
...
Privacy Protocol
...
DES
...
Privacy Password
...
Password (refer to technical requirements forms)
Include Page EX:SNMP_Network Conn_Tagging EX:SNMP_Network Conn_Tagging
Test Test Access
Once all fields are populated Click on the 'Test Access' button. This will test that VSM can connect to the server using the settings you have entered:
Both SSH and SNMP should return success. If not, troubleshoot the configuration.
...