...
| Field | Setting |
|---|---|
Vendor | Cisco Systems |
Product | Unified Boarder Border Element |
Equipment Name | Friendly name for this CUBE |
Username | Administrative Username |
Password | Administrative Password |
IP Address / Host Name | IP Address of server (Virtual in duplicated servers) |
Site | Free text field, this information will be included in alarm notifications from the VSM Workflow. |
Use Cisco APIs | Select if Using Cisco APIs for advanced options |
| Warning |
|---|
ADD: In the document, there is some highlighted text saying: "[SCREEN IMAGE HERE]" "Figure 91 - Web Portal - CUBE Configure Equipment" |
| Tip |
|---|
Site ID information in the ‘Site’ field will advise your NOC staff of the site where the Microsoft Server (i.e. the VSM Collector) is physically located. This is particularly helpful when the customer has multiple sites. |
| Warning |
|---|
ADD: In the document, there is some highlighted text saying: "[SCREEN IMAGE HERE]" "Figure 91 - Web Portal - CUBE Configure Equipment" |
...
Complete the Equipment tab and then click on the ‘SNMP Query’ tab.
Click on the down arrow, and select the SNMP version you wish VSM to use for querying the CUBE:
SNMP V1 or V2
CUBE SNMP V1/V2 Field Descriptions
| Field | Setting |
|---|---|
Version | V1, V2 |
SNMP Community String | Community String as administered on the CUBE |
SNMP V3
CUBE SNMP V3 Field Description
| Fields | Setting |
|---|---|
Version | V3 |
Username | SNMP V3 Username (refer to technical requirements forms) |
Authentication Protocol | SHA (Recommended) |
Authentication Password | Password (refer to technical requirements) |
Privacy Protocol | DES (Recommended) |
Privacy Password | Password (refer to technical requirements forms) |
Test Access
Once all fields are populated Click on the Test Access button. This will test that VSM can connect to the CUBE using the settings you have entered:
...