You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

VSM-E Probe updated

An updated version of the probe is now available 1.0.53.  This support the customizable Speed Test frequency.

New Alarms for VSM Eveywhere users

Unsecure Wi-Fi

You can now immediately identify when users are connected to unsecure Wi-Fi with the following two alarms, thus reducing vulnerability to security breach:

  • Wi-Fi Authentication Unsecure
    • User is connected to unsecure Wi-Fi network
  • Wi-Fi Encryption Unsecure
    • User is connected to an unencrypted Wi-Fi network

Poor Wi-Fi

You can now identify users that are having Wi-Fi quality issues and trouble shoot when it's happening with the following three alarms:

  • Poor Wi-Fi
    • Wi-Fi signal strength and Link Quality combination is lower than the recommended value for voice and non-HD Video calls - recommended Signal Strength value of -67 dBm or greater AND Link Quality of 41 dB or greater.
  • Low Wi-Fi Signal Strength
    • Wi-Fi signal strength is lower than the recommended value for voice and non-HD Video calls - recommended value is -67 dBm or greater.
  • Low Wi-Fi Link Quality
    • Wi-Fi link quality is lower than the recommended value for voice and non-HD Video calls - recommended value is 41 dB or greater.


Bug Fixes

Roles and access - when selecting equipment, the equipment list was not rendering correctly. This now renders correctly.

Roles and Access - deleted users were not being removed from the User 'count' on the Roles and Access page. The number of users in a Role is now correct. 

Reports - some incorrectly included Location as a selection on the Schedule report page. This has been fixed.

Network Topology Configuration - selecting Edit did not produce the pop-up modal to edit a selected Network device. This has now been fixed. 


  • No labels