Info |
---|
This section makes frequent use of data contained in the Technical Requirements. All relevant sections of the Technical Requirements Data collection should be completed or known before commencing with the steps in this section. |
Table of Contents
Web Portal Setup
Avaya Ethernet Switches are setup set up in VSM to enable Access Concentrator, to add a friendly name and default site for alarming purposes, as well as facilitating an offsite backup capability.
To add an Avaya Ethernet Switch to VSM select the customer, then navigate to Service Desk> Equipment Locations. Right-click on the Equipment Location (Appliance) that will serve this particular UC Server and select ‘Manage Equipment’
At the bottom of the ‘Manage Equipment’ page click on the ‘Add Equipment’ Button
A form will open which you can populate with the equipment details.
Select the Vendor ‘Avaya’ and Product ‘Ethernet Switch’.
If you are adding more than one piece of the same equipment type check the ‘Add another’ box at the bottom of the form and the bulk of the configuration will be carried over for the next item.
Avaya Ethernet Switch Field descriptions
Field | Setting |
Vendor | Avaya |
Product | Ethernet Switch |
Equipment Name | Friendly Name of the device |
IP address/Host Name | IP Address or FQDN of the device |
Username | Administrative Username |
Site | Free text field, this information will be included in alarm notifications from the VSM Workflow. |
Password | Administrative Password |
Command Set | Choose Ethernet Switch model from the drop-down |
Info |
---|
Site ID information in the ‘Site’ field will advise your NOC staff of the site where the Avaya Ethernet Switch is physically located. This is particularly helpful when the customer has multiple sites. |
Complete the Equipment tab and then click on the ‘SNMP Query’ tab.
Click on the down arrow, and select the SNMP version you wish VSM to use for querying the AES:
SNMP V1 or V2
AES SNMP V1/V2 Field Descriptions
...
Field
...
Setting
...
Version
...
V1, V2
...
SNMP Community String
...
Community String that is allowed Read access to the device.
SNMP V3
AES SNMP V3 Field Description
...
Field
...
Setting
...
Version
...
V3
...
Username
...
SNMP V3 Username
...
Authentication Protocol
...
SHA (recommended)
...
Authentication Password
...
Password
...
Privacy Protocol
...
DES (recommended)
...
Privacy Password
...
Password
Include Page EX:SNMP_Network Conn_Tagging EX:SNMP_Network Conn_Tagging
Test Access
Once all fields are populated Click on the Test Access button. This will test that VSM can connect to the AES using the settings you have entered:
Avaya Ethernet Switch Test Access
Both SSH and SNMP (if configured) should return success. If not, trouble-shoot troubleshoot the configuration.
Info |
---|
The SSH test ensures the VSM collector can connect to, and login using the account configured. |
Info |
---|
The SNMP test ensures an SNMP query can be run. |
Once testing is successful, click Save.