...
- Start an SSH session. At the command prompt type su root. When prompted enter the ‘root’ user password.
- Use the command 'useradd NAME'; where NAME is the account name to create and hit enter.
- Use the command 'passwd NAME'; where NAME is the account name created above and hit enter. Enter the password then hit enter (need to do this twice).
- Enter the command 'chage –M 99999 NAME'; where NAME is the account created above and hit enter to set the System Manager account password to not expire.
- Enter the command 'usermod -g 497 NAME'; where NAME is the account created above then hit enter. This will add the new user to the AvayaAVPGroup. (Note: if Group 497 does not exist the AvayaAVPGroup may be 498 or 986, to confirm you can run the command cat /etc/group and check which group number corresponds to the AvayaAVPGroup)
- Test you can login via SSH with your new credentials.
...
- Log in to the EPM Web interface using an account with the Administration user role.
- From the EPM main menu, select System Configuration > MPP Servers.
- On the MPP Servers page, click the VoIP Settings button.
- On the VoIP Settings page, enter the appropriate information RTCP Receiver IP address and Port information in the RTCP Monitor section and click Save.
- If you have changed any VoIP settings, restart all MPPs
Web Portal Configuration
Add AEP
...