| Info |
|---|
This section makes frequent use of data contained in the Technical Requirements. All relevant sections of the Technical Requirements Data collection should be completed or known before commencing with the steps in this section. |
...
Introduction
There are two parts to the configuration, the first being the server(s) under management, and the second being the supporting configuration on the web portal. Both are covered here.
Table of Contents
AAM Configuration
Adding a new AAM Login
...
Click on SNMP > Agent Status. To make changes to SNMP configuration the Master Agent must first be stopped by clicking the ‘Stop Master Agent’ button:
The VSM Probe Server collector must then be added as a destination for SNMP traps. For this reason the VSM Probe Server collector must be assigned a fixed IP address. Click on SNMP > FP Traps> Add/Change. Enter the details in the SNMP Version 3 option and click the Submit button:
...
Fields | Setting |
IP address | IP address of the VSM Probecollector |
Notification | trap |
User Name | Choose an SNMP User Name (refer to technical requirements forms) |
Authentication Protocol | SHA |
Authentication Password | Choose an Authentication Password (refer to technical requirements) |
Privacy Protocol | DES |
Privacy Password | Choose a Privacy Password (refer to technical requirements forms) |
Engine ID | Not required |
...