...
Administer any available 'Log Server'.
Field | Configuration |
---|---|
Enabled | Yes |
Protocol | UDP |
Port | 514 |
Server/IP | IP address of the VSM Probe |
Once the details have been entered click the Submit button.
...
Warning |
---|
ADDING: Avaya OneX Agent/Communicator |
Web Portal Configuration
Add ACM
Log in to the VSM web portal using your credentials and password.
...
If you are adding more than one piece of the same equipment type, check the 'Add another' box at the bottom of the form and the bulk of the configuration will be carried over for the next item.
Details
Field | Setting |
---|---|
Vendor | Avaya |
Product | Communication Manager |
Equipment Name | Friendly name for this ACM |
Username | ACM Username (refer to technical requirements forms) |
Password | ACM Password (refer to technical requirements forms) |
Username for Media Gateways | Media Gateway Username (refer to technical requirements forms) |
Password for Media Gateways | Media Gateway Password (refer to technical requirements forms) |
IP Address / Host Name | IP Address of server (Virtual in duplicated servers) |
Site | Friendly name for core site (where this server is located) |
Monitored IP Network Regions | Up to 10 Intervening IP Network Regions, comma-separated |
Disable automatic connection to Media Gateways | Check this to stop VSM accessing enhanced Media Gateway service information |
Use the above credentials for all Media Gateways | Unchecking this box allows you to set different credentials for all media gateways |
SNMP
Complete the Equipment tab and then click on the 'SNMP Query' tab.
Click on the down arrow, and select the SNMP version you wish VSM to use for querying the ACM:
SNMP V1 or V2
Fields | Setting |
---|---|
Version | V1, V2 |
SNMP Community String | Community String as administered on the ACM |
SNMP V3
Fields | Setting |
---|---|
Version | V3 |
Username | SNMP V3 Username (refer to technical requirements forms) |
Authentication Protocol | SHA |
Authentication Password | Password (refer to technical requirements) |
Privacy Protocol | DES |
Privacy Password | Password (refer to technical requirements forms) |
...
Also administered via Session Manager if applicable) then click the '+' button.
Test Access
Once all fields are populated Click on the 'Test Access' button. This will test that VSM can connect to the ACM using the settings you have entered:
Both SSH and SNMP should return success. If not, troubleshoot the configuration.
...
The command should execute successfully. If not, troubleshoot the configuration.
Return to the home page.
For the particular customer, select Availability Manager > Manage Alarms.
...