...
Click on Data Backup/Restore > Schedule Backup > Add:
| Fields | Setting |
|---|---|
Method | sftp (Secure File Transfer Protocol) |
User Name | Must match the SFTP Backup settings in the Web Portal Equipment Location |
Password | Must match the SFTP Backup settings in the Web Portal Equipment Location |
Hostname | VSM Probe IP Address (V4) |
Directory | / |
...
| Field | Setting |
|---|---|
Local Node | ProcR or C-Lan |
Local Port | 0 |
Remote Node | virsae |
Remote Port | 9000 |
| Reliable Protocol | N |
| Packet Response Timer | 30 |
| Session Connect Message Cntr | 3 |
| SPDU Cntr | 3 |
| Connectivity Timer | 60 |
Submit the form.
ACM System-parameters CDR
Use the command 'Change System-Parameters CDR' – using either the primary, if available, or the secondary, if the primary is in use.
Enter the output type as 'Unformatted' and names the output Endpoint CDR1 or CDR2: 
| Fields | Setting |
|---|---|
Primary/Secondary Output Format (use whichever is spare) | Unformatted |
Primary/Secondary Output Format (use whichever is spare) | CDR1 or 2 |
Submit the form.
Configure RTCP for VQM
The following changes are required to define the VSM Probe as the destination for RTCP (Voice Quality) traffic from the UC environment:
ACM System-parameters IP-Options
ACM System-parameters IP-Options Field Description
| Fields | Field | Setting |
|---|---|---|
Default Server IP Address | VSM Probe IP Address (V4) | |
Default Server Port | 5005 – see note *See Note | |
Default RTCP Report Period (secs) | 5 |
| Info |
|---|
Note: A single Equipment Location can support multiple RTCP Receivers. Each individual ACM and its adjuncts should report to a separate discrete RTCP Receiver using a unique port for each. |
Submit the form. Optional: Change 46xxsettings.txt file. The following lines can be added to the 46xxsettings file:
SIP Endpoints RTCP
The following settings in the 46xx Settings file are mandatory if you have SIP endpoints and you wish to receive VQM for their calls.
| Code Block | ||
|---|---|---|
| ||
SET RTCPCONT
SET RTCPMON { | ||
| Wiki Markup | ||
SET RTCPMON \[VSM Probe IP Address (V4)\]} SET RTCPMONPORT 5005SET5005 SET RTCPMONPERIOD 5 |
...
| Warning |
|---|
After these entries have been put into the settings file you will need to restart SIP endpoints for them to take effect. |
Avaya Agent For Desktop RTCP
If you are using Avaya Agent for desktop, the RTCP settings need to be set on each client using the following steps:
In the system tray, right-click the Avaya Agent for Desktop icon and select Configuration.
The system displays the Avaya Agent for Desktop Configuration window.
- In the Avaya Agent for Desktop Configuration window, select the Advanced tab.
- In the RTCP Monitoring Server Settings section, perform the following actions:
- In the Address field, type the IP address of the VSM probe.
- In the Port field, type the port number of the VSM RTCP receiver.
- In the Period field, enter ‘5 seconds’.
- Click Save.
| Warning |
|---|
ADDING: Avaya OneX Agent/Communicator |
Web Portal Configuration
Add ACM
Login to the VSM web portal using your credentials and password.
For the particular your customer, select Service Desk > Equipment Locations.
Right-click on the Equipment Location (Appliance) that will serve this particular ACM:UC Server and select 'Manager Equipment'.
At the bottom of the 'Manage Equipment' page click on the 'Add Equipment' button.
A form will open which you can populate with the equipment details using this table.
Web Portal - All Equipment Locations
Click on Manage Equipment.
Web Portal – Manage Equipment
Click on Add Equipment.
A form will open which you can populate with the equipment details as per table 12.
If you are adding more than one piece of the same equipment type check the 'Add another' box at the bottom of the form and the bulk of the configuratuon will be carried over for the next item.
Web Portal – Add Equipment 
Web Portal - ACM Configure Equipment
Web Portal – Add ACM Field Description
...