...
To use this command, log into the ACM server Linux prompt. Execute the command:
| Code Block | ||
|---|---|---|
| ||
$ almsnmpconf -d {VSM Probe IP ADDRESS} -c public |
...
Check that the INAD SNMP alarms are enabled by executing the following command:
| Code Block | ||
|---|---|---|
| ||
$ almenable |
If the output is: 
...
execute the command below to enable it:
| Code Block |
|---|
$ almenable –s y |
| Info |
|---|
For customers with duplicated servers, this needs to be done on each server independently. |
...
| Code Block | ||||
|---|---|---|---|---|
| ||||
SET SNMPADD \[{VSM Probe IP Address (V4)\]} SET SNMPSTRING \[{ACM SNMP Community Name\] or public} |
ACM Firewall
Ensure the Avaya Communication Manager firewall is configured to pass SNMP. Click on Security > Firewall:
...
| Note |
|---|
ACM policy must accept UDP 161 and 162. |
Enable Syslog streaming
The following changes are required to define the VSM Probe as a destination for Avaya Communication Manager Syslog. Click on Security > Server Log Files:
ACM Syslog
ACM Syslog Field Description
| Fields | SettingSettings |
|---|---|
When Submit button is clicked… | Checked |
Enable logging to the following syslog server | Selected |
Server name | IP address of the VSM Probe |
Selection for which logs are to be sent | All Checked |
ACM 8.1 and later:
Administer any available 'Log Server'.
| Field | Configuration |
|---|---|
| Enabled | Yes |
| Protocol | UDP |
| Port | 514 |
| Server/IP | IP address of the VSM Probe |
Once the details have been entered click the Submit button.
Sat Terminal
At the SAT terminal, enter the Once the details have been entered click the Submit button.
At the SAT terminal enter the command 'Change Logging-Levels'.
On , on page 1, set the 'Log Data Values' field to 'Both' and All Action Values (with the exception of Display, Get, List, Monitor and Status) to 'y' and on .
On page 2, set the 'Log PMS/AD Transactions' field to 'Y': 
ACM Logging Levels Page 1
ACM Logging Levels Page 2
| Tip |
|---|
These changes increase the logging level to add a greater level of Change Manager reporting. |
ACM Logging Levels Field Description
| Fields | Setting |
|---|---|
Log Data Values | Both |
All Action Values | Y – Except 'Display' 'Monitor' 'Status' 'List' 'Get' |
Log PMS/AD Transactions | Y |
Submit the form.
Configure Off-site Backups
The following changes are required to define the VSM Probe as a destination for ACM Backups.
These Backup files will be sent from the VSM Probe to the Virsae Cloud.
Click on Data Backup/Restore > Schedule Backup > Add:
ACM Off-site Backups
ACM Off-site Backups Field Description
| Fields | Setting |
|---|---|
Method | sftp (Secure File Transfer Protocol) |
User Name | 7F6952F9 (must Must match the SFTP Backup settings in the Web Portal Equipment Location) |
Password | Virsae (must Must match the SFTP Backup settings in the Web Portal Equipment Location) |
Hostname | VSM Probe IP Address (V4) |
Directory | / |
Click Add New Schedule.
Configure CDR (Optional)
Complete this section if the CDR feed from the customer will use VSM as a destination.
| Tip |
|---|
The more data that can be fed into VSM, the better the outcome will be. If there is a CDR application already in use, configure the secondary CDR feed. |
The following changes are required to define the VSM Probe as a CDR destination.
Use the command 'Change IP-Services' and add the service type for the CDR1 or 2: 
ACM IP-Services Page 1
Go to page 3 and check the setting for the CDR you just configured are as shown in the image below:
ACM IP-Services Page 3
ACM IP-Services Field Description
| Field | FieldsSetting | |
|---|---|---|
Local Node | ProcR or C-Lan | |
Local Port | 0 | |
Remote Node | virsae | |
Remote Port | 9000 | |
| Reliable Protocol | N | |
| Packet Response Timer | 30 | |
| Session Connect Message Cntr | 3 | |
| SPDU Cntr | 3 | |
| Connectivity Timer | 60 |
Submit the form.
ACM System-parameters CDR
Use the command 'Change System-Parameters CDR' – using either the primary, if available, or the secondary, if the primary is already used enter in use.
Enter the output type as 'Unformatted' and names the output Endpoint CDR1 or CDR2: 
ACM System-parameters CDR
ACM CDR Field Description
| Fields | Setting |
|---|---|
Primary/Secondary Output Format (use whichever is spare) | Unformatted |
Primary/Secondary Output Format (use whichever is spare) | CDR1 or 2 |
Submit the form.
Configure RTCP for VQM
The following changes are required to define the VSM Probe as the destination for RTCP (Voice Quality) traffic from the UC environment:
ACM System-parameters IP-Options
ACM System-parameters IP-Options Field Description
...