...
| Note |
|---|
Prior to installation, download the RPi.zip package from Service Desk> Files and Folders> Shared with me> VSM> VSM Software> Raspberry Pi. Right-Click the 'RPi.zip' file and download. Once downloaded, extract the file. The Zip file contains two tools that are necessary for installation: the Virsae VSM Management Tool and Win32DiskImager. |
Burning the ISO Image to Micro SD Anchor BurnISO BurnISO
| BurnISO | |
| BurnISO |
Insert your Micro SD card into a card reader attached to your PC (You may need to use a full-size SD card adaptor for this).
Browse Navigate to where you extracted the RPi.zip file, then go into the Win32DiskImager directory and run Win32DiskImager.exe as an Administrator.
You may receive a User Account Control dialogue, if so check the program name is correct and then select Yes:
...
When complete, click ‘OK’ and close Win32 Disk Imager.
| Warning |
|---|
If the error persists, create a clean partition following the instructions given here, then start again from the top of this section. |
Connecting to the Customer's network and Customer Configuration
...
Connect the Micro USB power supply to a power source (Preferably UPS and surge-protected), then insert the micro USB cable into the port on the side of the Raspberry Pi. At this point the Raspberry Pi will begin to boot up.
On your PC, find the VSM Express Management tool (The VSMExpressManagementTool.exe application from C:\Program Files (x86)\Virsae Group\VSM Express Tool directory) right Click and select ‘Run As Administrator’Navigate to where you extracted the RPi.zip file, then go into the VSMManagementTool directory and run VirsaeManagementTool.exe as an Administrator.
You may receive a Windows Security Alert popup if so check the details refer to Virsae Group Ltd and Virsae.com click Allow Access:
...