...
| Info |
|---|
| This document makes frequent use of data contained in the Technical Requirements document. All relevant sections of the Technical Requirements document should be completed or known before commencing with the steps in this document. |
| Excerpt | ||
|---|---|---|
Machine Proxy Agent InstallationThe Machine Proxy Agent (MPA) must be installed on each Microsoft Server under support. MPA is not required for Access Concentrator, the MPA collects infrastructure performance and connectivity information, so is needed for all other aspects of the service. Download the latest Machine Proxy Agent installation package from your VSM portal. This is located in ‘Service Desk> Files and Folders> Shared with me> Virsae Owners> VSM> VSM Software> VSM Machine Proxy Agent XXXX.zip” Copy the install package to the machine on which it is to be installed. Right click on the installation package and extract the installation files to a known location. Navigate to the extracted files then right click on the setup.exe file and select ‘Run As Administrator’. When prompted click 'Next' to install the Machine Proxy: Check the installation directory is satisfactory and then click 'Next': On the ‘Confirm Install’ prompt click 'Next': When prompted, enter the IP address or FQDN of the VSM Client on your network, then click ‘Check Connection’: If the ‘Check Connection’ succeeds click ‘Save’:
When the installation is complete click OK and then Close: |
Web Portal Setup
Windows Servers are setup in VSM to enable access concentration to these devices and/or to add a friendly name to devices that are not administered under their own specific vendor.
...