...
Replace the variables as per the table below:
| Field | Description |
|---|---|
| IPAddress | The IP Address of the VSM Collector |
| Username | The SNMPV3 username administered in VSM |
| authpwd | The Authorisation Password for the SNMPV3 user administered in VSM |
| auth | The Authorisation type for the SNMPV3 User: MD5 or SHA |
| privpwd | The privacy password for the SNMPV3 user administered in VSM |
| priv | The Privacy type for the SNMPV3 user: DES, AES128, AES192, AES256 |
| engID | SNMP Engine ID - This is the code '0x80001ae903' followed by the AAM/IX server MAC address with hyphens removed e.g. if the MAC address is 00-FF-39-B4-A8-38, then the engine ID will be 0x80001ae90300FF39B4A838 |
For e.g. To set this for a VSM collector on 192168.10.1, with an SNMPV3 user account virsae with the password virsae123 using Authorisation type SHA and Privacy type DES and the AAM server MAC address is 00-FF-39-B4-A8-38 use the following script:
...
The ucsnmpservice service must be restarted after executing the command line.
To issue a test trap from AAM/IX use the following command at the command prompt:
| Code Block |
|---|
UCSNMPConfig.exe trap test |