...
Under 'Role Assignment', click the "Assign Role to Group" button.
A page will appear with a list of all available roles.
...
CUCM SNMP V3 Configuration
Navigate to SNMP>V3>SNMP Destination Configuration and follow the same steps described earlier to add SNMP V2 DestinationSNMP>V3>User
SNMP V3 SNMP Destination ConfigurationUser Configuration
Select Server from the drop down list and click find.
...
SNMP V3 User Configuration
Follow the same steps described in configuring SNMP Notification Configuration on SNMP V2 section Navigate to Snmp >> V3 >> Notification Destination
SNMP V3 Notification Destination
Choose server >>Find>>Click Add New
SNMP Notification Destination Server Selection
The following page appear, from the drop down list choose Add new.
SNMP Notification Destination Configuration
SNMP Notification Destination Configuration Drop Down List
Enter the Values in the page as per following
SNMP Notification Destination
Field | Value |
Host IP Addresses | Add New is selected |
Host IP Address | VSM Probe IP Address |
Port Number | Default is 162, change it only if needed |
SNMP Version | Choose either V1/V2C |
Notification Type Information | Trap |
SNMP Notification Destination Configuration – Add New Page
SNMP Notification Destination Configuration Sample Configuration
Once you choose Notification Type Community String Information will display.
Choose the community String created earlier and check apply to All Nodes.
SNMP V3 Notification Destination Configuration – Apply To All Nodes
CUCM syslog configuration
...