...
Make sure you can sign in to CUCM with the newly created account by signing out and sign back in again with the your new account.
Anchor
CUCM SNMP ConfigurationCUCM
SNMP
...
SNMP configuration is required as part of CUCM Monitoring, SNMP can be configured as V1 ,V2 or V3 based on the customer requirements.
...
Select the Vendor ‘Cisco Systems’ and Product ‘Unified Communications Manager’.
Web Portal – Add Equipment
| Info |
|---|
| If you are adding more than one piece of the same equipment type check the ‘Add another’ box at the bottom of the form and the bulk of the configuration will be carried over for the next item. |
...
Web Portal – Add CUCM Field Description Anchor AddCUCMFields AddCUCMFields
...
| Info |
|---|
| Site ID information in the ‘Site’ field will advise your NOC staff of the site where the Microsoft Server is physically located. This is particularly helpful when the customer has multiple sites. |
Web Portal - CUCM Configure Equipment
Complete the Equipment tab and then click on the ‘SNMP Query’ tab.
Click on the down arrow, and select the SNMP version you wish VSM to use for querying the CUCM:
SNMP V1 or V2
Web Portal – CUCM SNMP V1/V2 Query
...
Fields | Setting |
Version | V1, V2 |
SNMP Community String | Community String as administered on the CUCM |
SNMP V3
Web Portal – CUCM SNMP V3 Query
...
Once all fields are populated Click on the Test Access button. This will test that VSM can connect to the CUCM using the settings you have entered:
Web Portal – CUCM Test Access
...
Both SSH and SNMP should return success. If not, trouble-shoot troubleshoot the configuration.
| Info |
|---|
| The SSH test ensures the VSM probe can connect to, and login using the account configured. |
...